Journal of Materials Chemistry A advanceAccess- Advanced catalyst materials for plastic upcycling: from nanoparticles to single-atom catalysts November 16, 2026Advanced catalytic conversion technologies, specifically photocatalysis and electrocatalysis, play a pivotal role in the high-value upcycling of waste plastics. This review systematically summarizes recent advances in catalysts for plastic upcycling, highlighting their evolution from nanoparticle (NPs) to single-atom catalysts (SACs). First, the physicochemical properties of nanoparticle catalysts (NPCs), alongside their catalytic behaviors and product-formation mechanisms […]
- Synergistic lattice and defect engineering in BNT-based high-entropy thin films for dielectric energy storage November 16, 2026The strong A-site chemical disorder in the Bi0.2Na0.2Ca0.2Sr0.2Ba0.2TiO3 high-entropy perovskite thin film gives rise to a desirable relaxor behavior, rendering it promising for dielectric energy storage. However, the random occupancy of diverse cations leads to substantial fluctuations in the local chemical environment that trigger local lattice distortions and structural disorder, which in turn facilitate the […]
- In situ cross-linked phosphazene binders with artificial interphases for high-rate, flame-retardant lithium-ion batteries November 16, 2026Conventional polymeric binders often limit the rate capability and safety of high-energy-density battery electrodes by acting as electrochemically passive components. Herein, we report a multifunctional phosphazene binder (xFPDAB) designed as an advanced interfacial engineer for high-performance lithium-ion battery electrodes. During electrode fabrication, cyclic phosphazenes undergo thermally induced in situ cross-linking to establish a durable 3D […]
- Ultra-low temperature oxygen evolution over NiFe-LDH with dynamic strain induced by a 3D printed NiTi alloy November 16, 2026Low-temperature water electrolysis is pivotal for realizing distributed green hydrogen production in cold climates. However, catalyst design has almost exclusively focused on ambient or elevated temperatures, where oxygen evolution reaction (OER) kinetics are far less sluggish than those under subzero conditions. Here we report a martensitic transformation-driven dynamic strain strategy to boost the low-temperature OER […]
- Dual-function interfacial molecular engineering enabling simultaneous fire retardancy and mechanical reinforcement in carbon fiber-reinforced composites November 16, 2026Epoxy/carbon fiber (EP/CF) composites are widely used because of their excellent properties; however, the inherent flammability of EP/CF composites severely limits their application in safety-critical fields. Traditional flame-retardant modifications, whether via matrix blending or fiber surface treatment, can enhance flame retardancy to some extent, yet they often lead to degraded mechanical performance or insufficient efficiency. […]
- Domino effect of synergistic adsorption–catalysis of CoS/CoNi 2 S 4 anchored carbon tubes in modified separators toward superior redox reaction kinetics of lithium–sulfur batteries November 16, 2026Sluggish multi-step redox kinetics and the severe shuttle effect of lithium polysulfides restrict the enhancement of the electrochemical performance of Li–S batteries. To address these issues, four novel materials derived from hollow sea-urchin-like Ni–Co MOFs via sintering under different atmospheres, including a pyrolysis product, an oxidation product, a sulfidation product (MOF-S), and a phosphidation product […]
- Asymmetric noncoplanar sulfur-bridged FeMn dual-atom electrocatalysts for enhanced oxygen reduction reaction November 13, 2026Sluggish kinetics of the oxygen reduction reaction (ORR) in microbial fuel cells (MFCs) calls for efficient and durable non-platinum catalysts. Herein, a sulfur-bridged FeMn dual-atom catalyst (FeMn-SNC) featuring an asymmetric FeN3–S–MnN3 configuration, which was precisely identified by EXAFS, is reported. The unique S-bridge not only suppressed metal aggregation but also enabled a synergistic FeMn electronic […]
- Camel-inspired double-layer MXene/GO phase change composite aerogel with integrated heat absorption, thermal insulation and microwave absorption November 13, 2026Thermal management materials for electronic equipment have been extensively investigated under ambient conditions. However, the development of multifunctional thermal management materials that can simultaneously address internal heat absorption, external thermal insulation and additional functionalities in extreme outdoor environments remains largely unexplored. Inspired by the thermal management mechanism of camel humps, a double-layer aerogel architecture integrated […]
- Correction: Enriching vibration-induced triboelectric signal waveform characteristic toward monitoring of calcium carbonate powder-processing equipment November 13, 2026Correction for ‘Enriching vibration-induced triboelectric signal waveform characteristic toward monitoring of calcium carbonate powder-processing equipment’ by Peng Li et al., J. Mater. Chem. A, 2026, 14, 43675–43689, https://doi.org/10.1039/d6ta07859a.
- Optimizing dibenzo-fused cathodes for high-voltage organic dual-ion batteries: a combined DFT-ML approach November 13, 2026Organic dual-ion batteries (ODIBs) have emerged as a promising sustainable energy storage technology by replacing graphite cathodes, which suffer from significant volume expansion during anion intercalation, with structurally diverse organic materials. However, the vast chemical diversity of organic electrode materials, together with the wide range of compatible electrolytes, creates an enormous design space that makes […]
- Stable liquid-phase thiophosphate enables rapid reaction time for Li 6 PS 5 Cl sulfide electrolytes November 13, 2026The liquid-phase synthesis of sulfide solid electrolytes has been hindered by an incomplete understanding of thiophosphate reaction pathways and the transient nature of reactive intermediates. Here, we report a stable liquid thiophosphate intermediate formed from Li2S and P4S10 in acetonitrile, enabling the rapid reaction to form Li6PS5Cl (LPSC) from a complete liquid phase. Combining in […]
- Precursor composition engineering of cotton stalks enables synergistic pseudo-graphitic ordering and closed-pore development in hard carbon for sodium storage November 13, 2026Hard carbon anodes for sodium-ion batteries face competing structural requirements: efficient Na storage benefits from both short-range ordered pseudo-graphitic domains and abundant closed pores, which are often difficult to optimize simultaneously. To address this challenge, we regulate the lignocellulosic composition of cotton stalks via selective etching that enriches cellulose, modulating the subsequent carbonization evolution toward […]
- Advanced catalyst materials for plastic upcycling: from nanoparticles to single-atom catalysts November 16, 2026